The projection of the point on the X axis defines the peak amplitude of the_________
The projection of the point on the X axis defines the peak amplitude of the_________
In BPSK, we use a polar Non Return to Zero (NRZ) signal for _______________
In BPSK, we use a polar Non Return to Zero (NRZ) signal for _______________
Find the bandwidth for the AM if we need to modulate a 5-KHz voice _______________
Find the bandwidth for the AM if we need to modulate a 5-KHz voice _______________
The value of r in analog transmission is _________________
The value of r in analog transmission is _________________
The total bandwidth required for AM can be determined from the bandwidth of the audio signal _________________
The total bandwidth required for AM can be determined from the bandwidth of the audio signal _________________
Digital information in which the carrier signal is modified by one or more of its characteristics is called _______________
Digital information in which the carrier signal is modified by one or more of its characteristics is called _______________
The most efficient and commonly used digital to analog conversion mechanism is ______________
The most efficient and commonly used digital to analog conversion mechanism is ______________
In a constellation diagram, a signal element type is represented as a ________________
In a constellation diagram, a signal element type is represented as a ________________
The example of an analog to analog conversion is ______________
The example of an analog to analog conversion is ______________
The total bandwidth required for Amplitude Modulation (AM) is _______________
The total bandwidth required for Amplitude Modulation (AM) is _______________
The term that refers to the phase continues through the boundary of two signal elements is _______________
The term that refers to the phase continues through the boundary of two signal elements is _______________
The Quadrature means _____________
The Quadrature means _____________
A constellation diagram can help us to define the signal's _____________
A constellation diagram can help us to define the signal's _____________
Analog-to-analog conversion can be accomplished in ______________
Analog-to-analog conversion can be accomplished in ______________
In Binary Phase Shift Keying (BPSK), there are two values of phase i.e. 0 degree and _________________
In Binary Phase Shift Keying (BPSK), there are two values of phase i.e. 0 degree and _________________
When Amplitude Shift Keying (ASK) is implemented using only two levels then it is called _____________
When Amplitude Shift Keying (ASK) is implemented using only two levels then it is called _____________
In Multilevel Frequency Shift Keying (MFSK), to send 3 bits at a time we can use ___________
In Multilevel Frequency Shift Keying (MFSK), to send 3 bits at a time we can use ___________
In the case of Phase Modulation (PM), the value of beta (β) is_____________
In the case of Phase Modulation (PM), the value of beta (β) is_____________
The Quadrature Amplitude Modulation (QAM) has the same advantages as _______________
The Quadrature Amplitude Modulation (QAM) has the same advantages as _______________
Multilevel Amplitude Shift Keying (MASK) is not implemented with pure Amplitude Shift Keying (ASK), it is implemented with _______________
Multilevel Amplitude Shift Keying (MASK) is not implemented with pure Amplitude Shift Keying (ASK), it is implemented with _______________