The minimum bandwidth of Manchester and differential Manchester is ______________
The minimum bandwidth of Manchester and differential Manchester is ______________
The technique that is most common to change an analog signal to digital data is ___________
The technique that is most common to change an analog signal to digital data is ___________
The actual bandwidth of a digital signal is infinite, the effective band width would be ___________
The actual bandwidth of a digital signal is infinite, the effective band width would be ___________
A system is using NRZ-I to transfer 10-Mbps data. What would be minimum bandwidth_____________
A system is using NRZ-I to transfer 10-Mbps data. What would be minimum bandwidth_____________
The bandwidth is proportional to the _____________
The bandwidth is proportional to the _____________
The value of the error for any sample is less than ____________
The value of the error for any sample is less than ____________
The coding scheme that was designed to be used in combination with None Return to Zero- Invert (NRZ-I) is ______________
The coding scheme that was designed to be used in combination with None Return to Zero- Invert (NRZ-I) is ______________
The transmission that is used without the timing signal is called ______________
The transmission that is used without the timing signal is called ______________
Quadrature amplitude modulation is a combination of ___________
Quadrature amplitude modulation is a combination of ___________
The term that refers to the shortest unit and carries data elements is called__________
The term that refers to the shortest unit and carries data elements is called__________
Line coding, block coding, and scrambling are three techniques of _____________
Line coding, block coding, and scrambling are three techniques of _____________
The term that means data is sent over four wires at the same time is ______________
The term that means data is sent over four wires at the same time is ______________
In bipolar encoding, we use three levels: positive, zero, and _________
In bipolar encoding, we use three levels: positive, zero, and _________
The transmission mode in which multiple bits are sent with each clock trick is __________
The transmission mode in which multiple bits are sent with each clock trick is __________
Parallel transmission is good in speed but it is very ___________
Parallel transmission is good in speed but it is very ___________
Signal rate is also called the _____________
Signal rate is also called the _____________
In Return to Zero (RZ), the signal changes not between bits but _______________
In Return to Zero (RZ), the signal changes not between bits but _______________
What is the number of bits per baud for PSK with four different phases ____________
What is the number of bits per baud for PSK with four different phases ____________
The bit rate for 1000 baud, FSK, baud rate would be _____________
The bit rate for 1000 baud, FSK, baud rate would be _____________
In synchronous transmission, we send bits one after the another without _____________
In synchronous transmission, we send bits one after the another without _____________