TECH-Comp. Networks-Process to Process Delivery:UDP,TCP and SCTP Test-2

In Process to Process delivery, a transport layer protocol needs a pair of ___________

1 Mark(s)

Frame Address
Destination Address
Socket Address
IP Address

Transmission Control Protocol (TCP), A connection-oriented transport protocol establishes a ______________

1 Mark(s)

Virtual Communication
Virtual Path
Virtual Flow
Virtual Header

A connection oriented protocol creates a relationship between the segments using ____________

1 Mark(s)

Sequence Frame
Sequence Packets
Flow Path
Sequence Numbers

No retransmission timer is set for an _____________

1 Mark(s)

RTO
ACK segment
FIN segment
Checksum segment

Transmission Control Protocol (TCP), Synchronize sequence numbers during ____________

1 Mark(s)

Pushing Data
Transformation
Connection
Controling

To obtain header length, we calculate it by ___________

1 Mark(s)

(5 X 4= 20) and (15 X 4= 60)
(10 X 2= 20) and (30 X 2= 60)
(4 X 5= 20) and (20 X 3= 60)
(2 X 10= 20) and (10 X 6= 60)

Stream Control Transmission Protocol (SCTP), a data chunk is numbered using a ___________

1 Mark(s)

TSN
SI
SSNs
All of the Above

The User Datagram Protocol (UDP) is called a ____________

1 Mark(s)

Connection Oriented protocol
Connectionless protocol
Communication-path Protocol
Connection Organizing protocol

In Stream Control Transmission Protocol (SCTP), the checksum is of __________

1 Mark(s)

16 Bits
32 Bits
64 Bits
128 Bits

User Datagram Protocol (UDP), is a suitable transport protocol for ____________

1 Mark(s)

Unicasting
Multicasting
Multilevel-cast
Multiple Unicast

Each synchronous transfer signal is composed of __________

1 Mark(s)

8 frames
80 frames
800 frames
8000 frames

An ACK segment, if carrying no data still consumes ___________

1 Mark(s)

One sequence number
Two sequence number
Three sequence number
No sequence number

In Process to Process delivery, the ports ranging from 49,152 to 65,535 are called ___________

1 Mark(s)

Registered ports
Well-known ports
Dynamic ports
Data Ports

Association establishment in Stream Control Transmission Protocol (SCTP), requires a ____________

1 Mark(s)

2 Way Handshake
3 Way Handshake
Four Way Handshake
1 Way Handshake

When a server wants to respond to a client, it sends messages to the outgoing queue, using the source port number specified in the ___________

1 Mark(s)

Port
Request
DataFrame
Packets

TCP processes at the ____________

1 Mark(s)

Physical layer
Data link layer
Session layer
Application layer

User Datagram Protocol (UDP), have a fixed-size header of __________

1 Mark(s)

10 Bytes
08 Bytes
06 Bytes
04 Bytes

SONET defines four layers: path, line, section, and ___________

1 Mark(s)

Monographic
Photonic
Geographic
Graphonic

Transmission Control Protocol (TCP), needs buffers for ____________

1 Mark(s)

Storage
Request
Connections
Transmission

In User Datagram Protocol (UDP), the user datagrams are not __________

1 Mark(s)

Channeled
Transformed
Numbered
Addressed

TECH-Comp. Networks-Process to Process Delivery:UDP,TCP and SCTP Test-2 : Question 1 of 20