TECH-Comp. Networks-Process to Process Delivery:UDP,TCP and SCTP Test-4

In User Datagram Protocol (UDP), Source port number is ___________

1 Mark(s)

16 Bits Long
14 Bits Long
12 Bits Long
10 Bits Long

The size of reserved bits in TCP for future use is _____________

1 Mark(s)

2-bit
4-bit
6-bit
8-bit

To distinguish between different data chunks belonging to the same stream, SCTP uses ________________

1 Mark(s)

Stream Sequence Number
Stream Serial Number
Stream Segment Number
Stream Slot Number

In TCP, each connection have __________

1 Mark(s)

1 Stream
2 streams
3 streams
Infinite Streams

Stream Control Transmission Protocol (SCTP),is a new reliable, message-oriented ______________

1 Mark(s)

Transport Layer Protocol
Linear Layer Protocol
Data Layer Protocol
Physical Layer Protocol

Transmission Control Protocol (TCP), adds a header to each ____________

1 Mark(s)

DataByte
Slot
Segment
Frame

The most common way that is used to achieve process-to-process communication is ______________

1 Mark(s)

Node/host paradigm
client/server paradigm
Network/transport paradigm
Process/Program paradigm

An association in Stream Control Transmission Protocol (SCTP), can involve ____________

1 Mark(s)

Single Stream
Multiple Stream
Double-level Stream
Oriented Stream

In SCTP, the receiver stores all chunks that have arrived in its queue including the ______________

1 Mark(s)

Out-of-Order Ones
Out-of-Flow Ones
Out-of-Reach Ones
Out-of-Index Ones

The minimum size of the process data that can be encapsulated in a UDP datagram would be ____________

1 Mark(s)

0 bytes
4 bytes
8 bytes
28 bytes

In Process to Process delivery, the server process must also define itself with a______________

1 Mark(s)

Slot Number
Port Number
Bit Number
Byte Number

Unlike UDP, TCP is a ___________

1 Mark(s)

Connectionless protocol
Stream-oriented protocol
Connection oriented protocol
BOTH A and C

ISN stands for ___________

1 Mark(s)

Initial slot number
Initial string number
Initial sequence number
Initial source number

SCTP protocol combines the best features of _________

1 Mark(s)

UDP
SMTP
TCP
both a and c

In the transport layer, a message is normally divided into transmittable ______________

1 Mark(s)

Segments
Signals
Networks
Frames

The transport layer may be responsible for flow and error Control, like the _____________

1 Mark(s)

Physical Layer
Data Link Layer
Subnet Layer
Application Layer

The service, in which data can flow in both directions at the same time in Transmission Control Protocol (TCP) is called____________

1 Mark(s)

Half-Duplex Communication
Full-Duplex Communication
Complex-Duplex Communication
Dubly-Duplex Communication

The Dynamic ports ranges from _____________

1 Mark(s)

0 to 1023
1024 to 49,151
49,152 to 65,535
0 to 65,535

The field that is used to detect errors over the entire user datagram is called __________

1 Mark(s)

Checksum
Error Detection Protocol
Source-Error Removal
Datagram-Error Removal

The port number used by the process running on the destination host is called ______________

1 Mark(s)

Source Port Number
Destination Port Number
Well-known Port Number
IP Port Number

TECH-Comp. Networks-Process to Process Delivery:UDP,TCP and SCTP Test-4 : Question 1 of 20