10BaseT is used to connect the stations by using ________________
10BaseT is used to connect the stations by using ________________
The minimum frame length for 1O-Mbps Ethernet is 64 bytes and the maximum is________________
The minimum frame length for 1O-Mbps Ethernet is 64 bytes and the maximum is________________
The original Ethernet has gone through ______________
The original Ethernet has gone through ______________
Gigabit Ethernet has a data rate of_____________
Gigabit Ethernet has a data rate of_____________
The data link layer in the IEEE standard is divided into two sub layers of ______________
The data link layer in the IEEE standard is divided into two sub layers of ______________
CRC field is used to show the _____________
CRC field is used to show the _____________
The maximum length of 1000BaseSX is______________
The maximum length of 1000BaseSX is______________
The line encoding scheme that is used in 1000BaseCX is ________________
The line encoding scheme that is used in 1000BaseCX is ________________
The block encoding increases the bit rate from______________
The block encoding increases the bit rate from______________
In IEEE Project 802, the Logic Link Control (LLC) is used to control and handle the____________
In IEEE Project 802, the Logic Link Control (LLC) is used to control and handle the____________
Media access control is the sub layer of ______________
Media access control is the sub layer of ______________
NIC stand for _______________
NIC stand for _______________
Fast Ethernet can transmit data at the rate of___________
Fast Ethernet can transmit data at the rate of___________
The maximum length of 100BaseTX is_______________
The maximum length of 100BaseTX is_______________
In multicast the relationship between the sender and receiver is ___________
In multicast the relationship between the sender and receiver is ___________
NIC provides an Ethernet station with physical address of_______________
NIC provides an Ethernet station with physical address of_______________
In standard Ethernet, data is converted to a digital signal using the _____________
In standard Ethernet, data is converted to a digital signal using the _____________
In Ethernet frame, both destination and sender addresses are of length _____________
In Ethernet frame, both destination and sender addresses are of length _____________
Three different encoding schemes were used for all the implementations in____________
Three different encoding schemes were used for all the implementations in____________
By using fast Ethernet two stations are connected via __________
By using fast Ethernet two stations are connected via __________